description applications instrumentation robotics power supplies transportation entertainment (brand-lights) technical characteristics slx mechanical characteristics crimp removable gold plated on nickel underplate machined contacts 12 insert arrangements which accept contact gauges awg 20, 16, 12. in the four different shell sizes 10, 20, 30 & 40 temperature range -55? to 125? clear cadmium plated, nickel plated and black coated aluminium molded shells mating by screwing system strain-relief integrated to the backshell neoprene inserts reinforced mating screw rohs versions: - black coating (non conductive) - nickel plating (conductive) ul recognition n e160967(01) performances according to nff61030 electrical characteristics contacts caracteristics contact gauge awg 20 16 12 contact diameter (mm) 1 1.5 3 nominal current (a) 7.5 13 25 contact resistance (ohm) 0.005 0.002 0.002 contact retention in the insert (n) 30 40 45 doc-000003-ang-b crimp version industrial circular connectors slx contact arrangements electrical caracteristics test voltage at sea level (vrms) 1500 2300 2800 contact arrangements 14v-17p-22b 27e-337p 319l-419ar 23c-212af-38j 439r 315k slx series are derived from the standard sl series, and have the particularity to use machined contacts with crimp barrels. the one part neoprene insert provides a use in a temperature range from -55? to 125?, the possibility to change the contacts for reparation, and an higher test voltage capability. 12 different contacts arrangements are available which include different contact gauges (20, 16, 12) in the four different shell sizes 10, 20, 30 & 40. slx series panel drilling is the same as for sl series and slx series connectors are intermatable with sl series connectors (slx plug with sl receptacle and vice versa). rohs ?black coating ?nickel plating crimp removable contacts 125 c crimp removable contacts 125 c
dimensional characteristics contacts and wires contact crimp barrel pin awg section mm 2 diameter over conductor maxi gauge internal depth diameter gauge mini maxi (mm) diameter awg diameter in mm (mm) mini maxi over sleeving in mm (mm) 12 2.5 7.5 3 14-12 1.80*** 3.30 1.7 2.45 4.2 16 1.95 6.4 1.6 20 -> 14 0.60* 1.91 1 1.9 2.8 20 1.35 4 1 24 -> 18 0.22** 0.93 0.6 1.3 2.4 * the use of a 800629 reducing sleeve is necessary for cable section less than 0.60 mm 2 ** the use of a 800612 reducing sleeve is necessary for cable section less than 0.22 mm 2 *** the use of a 900092 reducing sleeve is necessary for cable section less than 1.80 mm 2 for # 16 to 20 900093 reducing sleeve is necessary for cable section less than 1.80 mm 2 for # 20 to 24 dimensions of the connectors for more details about dimensional characteristics, please refer to standard sl data-sheet. some dimensions mentioned bellow regarding insulators are specific to slx series. receptacle a diam. b c diam. d diam. e diam. f diam. h size (mm) (mm) (mm) (mm) (mm) (mm) (mm) 10 25 21 19 28 3.2 16.5 3.2 20 31 28.1 24 37 3.5 25.5 3.5 30 46 42.2 34 52 3.5 35.5 3.5 40 56 52.2 41 65 3.5 47 3.5 h h h h (15,1 for size 10) (24,1 for size 10) 14 v 17 p 22 b 23 c 27 e 212 af 38 j 319 l 337 p 419 ar 439 r 315 k all dimensions are given in mm contacts insert arrangements mating face view of the male insert contact type contact size 20 16 12
slx overall dimensions contacts as spare parts* contact gauge awg 12 16 20 part-number for one pin 21713 800660 800650 part-number for one socket 21728 800664 800654 cabling tools contacts insertion and removal cabling process crimping process place the positioner in the pliers. choose the selector number on the positioner according to the contact size to crimp. strip the wire end (7.5mm for size 12 contact / 6mm for size 16 contact / 4mm for size 20 contact). insert the wire in the crimp barrel of the contact and check through the inspection hole of the contact that wire is well- placed. place the contact with the wire into the pliers until the stop. completely close the tool and after, let it open itself. visually check if crimping is correct and by the inspection hole of the contact if the wire is well-placed in the crimp barrel. contact insertion insert the wired contact in the groove of the tool, taking care that the extremity of the tool touches the shoulder of the contact. insert the contact in its cavity from wiring side and steadily push the tool along the axis of the cavity until the contact locks home. carefully withdraw the tool , applying a forward pressure on the wire. pull on the wire to check that the contact is correctly locked. contact removal insert the tool from the mating side and push it along the contact axis until contact unlocks. pull the contact out from the rear of the connector. contacts insertion tool p/n removal tool p/n # 12: pin 141900 21746 # 12: socket 141900 21745 # 16: pin 48680 809731 # 16: socket 48680 809732 # 20: pin 39048 809729 # 20: socket 39048 809730 straight or right-angle backshell * black and nickel backshells are rohs compliant. - straight or right-angle backshells are delivered with different clamping pads. - green backshells (conductive finish) are delivered with metallised clamping pads. accessories crimping tools ?crimping pliers: 809857 (mil. p/n: m22520/1-01) ?positioner: 21770 for arrangement 419 ar and 23c: tp943 ?controlling jauge: 809907 (mil. p/n: m22520/3-1) (selector number: 4) 10 47377n 47377ni 21458n 47381n 47381ni 21462n 20 47378n 47378ni 21459n 47382n 47382ni 21463n 30 47379n 47379ni 21460n 47383n 47383ni 21464n 40 47380n 47380ni 21461n 47384n 47384ni 21465n backshell reference connector straight right-angle size black* nickel* green cadmium black* nickel* green cadmuim (non conductive) (conductive) (conductive) (non conductive) (conductive) (conductive) adaptator for flexible conduit and pg: sealing sleeve: plug and receptacle protection caps: receptacle with locking ring protection caps: connector pg size thread sl rf 209n 20 9 sl rf 211n 20 11 sl rf 313n 30 13 sl rf 316n 30 16 sl rf 416n 40 16 sl rf 421n 40 21 sl rf 429n 40 29 connector size ref. straight 10 43458 right-angle 10 43473 straight 20 43456 or 30 44666 right-angle 40 43457 } f3b bf size 1b: 10 3b: 30 2b: 20 4b: 40 m: pi n co nn ecto r f: socket co nn ecto r fm 3b slb f: pl u g e: recept a cle size 1b: 10 3b: 30 2b: 20 4b: 40 m: pi n co nn ecto r f: socket co nn ecto r pl u g an d r ecept a cle: n o n e li n e m o un t r ecept a cle: r for plug or line mount receptacle * for arrangement 419 ar and 23c: part-number for one pin: 35941 part-number for one socket: 35970 - caps and sealing sleeves are rohs.
how to order do not hesitate to contact us for further information amphenol socapex 948, promenade de l?rve - bp 29 f - 74311 thyez cedex tel.: +33 (0) 4 50 89 28 00 - fax: +33 (0) 4 50 96 29 75 http://www.amphenol-socapex.fr plug and inline receptacle (backshell sets included) slx series slx d f m d 319l d: black coating blank: nickel plating f: plug or inline receptacle type of contact: m: male f: female d: plug + straight backshell dr: inline receptacle + straight backshell c: plug + right angle backshell contact arrangement (see page 2) blank: black coating ni: nickel plating rohs part numbers : nickel plated or black coatedx slx series slx f m d 319l f : plug or inline receptacle type of contact: m: male f: female d: plug + straight backshell dr: inline receptacle + straight backshell c: plug + right angle backshell contact arrangement (see page 2) non rohs part numbers : clear cadmium plated panel mount receptacle and receptacle with locking ring slx series slx d e f 319l d: black coating blank: nickel plating e: receptacle or receptacle with locking ring type of contact: m: male f: female blank: receptacle e: receptacle with locking ring contact arrangement (see page 2) blank: black coating ni: nickel plating add ma for tin plated retention ring (grounding) rohs part numbers : nickel plated or black coated slx series slx e f 319l e: receptacle or receptacle with locking ring type of contact: m: male f: female blank: receptacle e: receptacle with locking ring contact arrangement (see page 2) add ma for tin plated retention ring (grounding) non rohs part numbers : clear cadmium plated body of plug and inline receptacle slx series slx d b m 319l d: black coating blank: nickel plating body of plug or inline receptacle type of contact: m: male f: female blank: body of plug r: body of inline receptacle contact arrangement (see page 2) blank: black coating ni: nickel plating rohs part numbers : nickel plated or black coated slx series slx b m 319l body of plug or inline receptacle type of contact: m: male f: female blank: plug r: inline receptacle contact arrangement (see page 2) non rohs part numbers : clear cadmium plated with those part numbers the straight and right angle backshells are not included. to de?ne part numbers of backshells, please to consult page 2. comment : panel gasket is delivered with the receptacle comment : panel gasket is delivered with the receptacle
|
